Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 180

Outputs
Name
LED1_S
LED2_S
LED3_S
Assigned global variables
SP_OV_Switch
USB_MCP_SP_OV
Relevant PLC machine data
No.
14510 [15]
14510 [16]
14512 [20]
Example for calling subroutine 62
180
Type
BOOL
BOOL
BOOL
BYTE MB202
BYTE MB209
Unit Range
0.1s 0.5 s to 3
s
0.1s 0.1 s to 3
s
- -
Description
Lights, spindle override < 100%; flashing, 50%
Lights, spindle override 100%
Lights, spindle override 105-115%; flashing, 120%
Spindle override switch buffer
USB MCP signal: spindle override
Description
Spindle override 50% key holding on time defined
Spindle override 100% key holding on time defined
Bit 5: define the spindle override startup value (0: the startup spindle
override is always 100%; 1: recode the spindle override value of the last
machine turn off for the next startup)
Bit 6/7: define the spindle override shift speed
bit 6 = 0, bit 7 = 0
•
Standard speed. The steps are 50%, 55%, 60%, 65%, 70%, 75%,
80%, 85%, 90%, 95%, 100%, 105%, 110%, 115%, 120%
bit 6 = 1, bit 7 = 0
•
Two times the standard speed. The steps are 50%, 60%, 70%, 80%,
90%, 100%, 110%, 120%
bit 6 = 0, bit 7 = 1
•
About three times the standard speed. The steps are 50%, 60%,
70%, 85%, 100%, 110%, 120%
bit 6 = 1, bit 7 = 1
•
About four times the standard speed. The steps are 50%, 60%,
80%, 100%, 120%
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018