Preparation Before Commissioning; Scope Of Delivery; System Overview - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual

2

Preparation before commissioning

2.1

Scope of delivery

2.1.1

System overview

The SINUMERIK 808D ADVANCED control system is an economic numerical control system for milling or turning machines.
The SINUMERIK 808D ADVANCED controller, coupled with the high performance SINAMICS V70 feed/spindle drive,
SIMOTICS S-1FL6 feed motor, and SIMOTICS M-1PH1 main motor, is able to control up to five axes including analog/digital
spindles.
Control system versions
Control system
Applicable machine tools
PPU Applicable soft-
ware version
PPU variants
Panel layout
Operator panel
with English keys
Operator panel
with Chinese keys
MCP Configurable MCPs are available in the following versions:
Horizontal MCP, with English keys and override switches
•
Horizontal MCP, with Chinese keys and override switches
•
Horizontal MCP, with Chinese keys and a reserved slot for the handwheel (applicable to turning machines
•
only)
Vertical MCP, with English keys and a reserved slot for the handwheel
•
Vertical MCP, with Chinese keys and a reserved slot for the handwheel
•
Vertical MCP, with English keys and an override switch for the spindle
•
Vertical MCP, with Chinese keys and an override switch for the spindle
•
Number of Total
configura-
Standard axes
ble axes
Additional axes
(license required)
Communication with drive
Configurable drives
Configurable motors
√: available
18
SINUMERIK 808D ADVANCED T
Turning machines
V4.90
PPU161. PPU160. PPU151.
3 3 3
Horizon- Vertical Horizon-
tal tal
√ √ √
√ √ √
Up to 6 Up to 4
3 3
3 1
Drive Bus interface
SINAMICS V70 feed/spindle drive
SIMOTICS S-1FL6/SIMOTICS M-1PH1
SINUMERIK 808D ADVANCED M
Milling machines
V4.90
PPU150. PPU161. PPU160.
3 3 3
Vertical Horizon- Vertical
tal
√ √ √
√ √ √
Up to 6
4
2
PPU151. PPU150.
3 3
Horizon- Vertical
tal
√ √
√ √
Up to 4
4
-
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018