Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 45
Hide thumbs
Also See for SINUMERIK 808D ADVANCED Series:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
5.
Press this softkey to enter the window for the network configuration.
Note: Make sure the following vertical softkey is deactivated:
6.
Configure the network as required in the following window:
You can configure DHCP with the following key:
Note: If you select "No" for DHCP, you must enter the IP address (which must belong to the
same network as that of your computer) and subnet mask manually.
7.
Press this softkey to save the configuration. If you select "Yes" for DHCP, you also need to
restart the control system to activate the network configuration.
8.
Start PLC Programming Tool on your computer, and click the
open the following dialog box:
button in the toolbar to
45
Advertisement
Table of Contents
