Personal Computer - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual
Hide thumbs
Also See for SINUMERIK 808D ADVANCED Series:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
2.3
Personal computer
A personal computer with the following basic configuration is necessary for commissioning:
● Operating system: Windows Vista (both 32-bit and 64-bit versions)/Windows 7 (both 32-bit and 64-bit versions)
● Hard drive capacity: > 40 GB
● Memory capacity: > 1 GB
● Ethernet interface: for NC, PLC, and drive commissioning
● RJ45 Ethernet cable
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
9.
Enter a desired password in the input fields and then click this button to save.
This password ensures that all the connection data for AMM is encrypted. The password
can be subsequently changed at any time from the menu bar.
10.
Click the
button in the toolbar or select from the main window menu as follows to call
the connection dialog box:
11.
Select the network connections option and click this button to create new connection.
12.
Assign the parameters for a new network connection in the dialog box. Note that the access
level and password must be specified according to those set on the HMI.
Note: To avoid unauthorized access of the controller, change the Siemens default pass-
words to your own ones. For more information about changing a password, see Section
"Setting the password (Page 122)".
13.
After you finish the editing, click this button to save the settings.
14.
Click the following button or simply double-click the connection option to establish the con-
nection.
49
Advertisement
Table of Contents
