Simotics M-1Ph1 Main Motors - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual

15.3.2

SIMOTICS M-1PH1 main motors

General technical data
Parameter
Type of motor
Cooling method
Operating temperature
Storage temperature
Relative humidity (storage)
Relative humidity (operating)
Installation altitude
Maximum noise level
Thermal class
Vibration severity grade
Shock resistance
Static bearing lifetime
Oil seal lifetime
Encoder lifetime
Motor lifetime
Paint finish
Degree of protection
Type of construction
Positive rotation
Certification
This lifetime is only for reference. When a motor keeps running at rated speed under rated load, replace its bearing after
1)
20,000 hours to 30,000 hours of service time. Even if the time is not reached, the bearing must be replaced when unu-
sual noise, vibration, or faults are found.
Specific technical data - SH100
Article no. 1PH110...
Insulation class
Rated power
Rated torque
Maximum torque for 30 s
Overload torque (S6-25% (1.5 Pn))
Rated speed
Maximum speed
382
Description
Asynchronous motor
Fan-cooled
-15 °C to 40 °C (without power derating)
-20 °C to 65 °C
≤ 95%
≤ 90%
≤ 1000 m (without power derating)
72 dB
F
1PH11❑❑-1❑F:
Grade B is maintained up to 1800 rpm; Grade S is maintained from
1800 rpm to 10000 rpm
1PH11❑❑-1❑D:
Grade B is maintained up to 1800 rpm; Grade R is maintained from
1800 rpm to 6000 rpm
2.25 m/s (continuous in axial direction); 10 m/s
2
al direction)
> 20000 h
1)
> 20000 h
> 20000 h
20000 h
Anthracite
IP54 (dust-tight and splash-proof during motor operation)
IM B5, IM B3, IM V1, and IM V5
Clockwise (default setting in SINAMICS V70 spindle drives)
1-1❑F 3-1❑F
F
3.7 kW 5.5 kW
24 Nm 35 Nm
48 Nm 70 Nm
36 Nm 52.5 Nm
1500 rpm 1500 rpm
10000 rpm 10000 rpm
5-1❑F 3-1❑D
7.5 kW 3.7 kW
48 Nm 35 Nm
96 Nm 70 Nm
72 Nm 52.5 Nm
1500 rpm 1000 rpm
10000 rpm 6000 rpm
6FC5397-4EP10-0BA8, 07/2018
(continuous in radi-
2
5-1❑D
5.5 kW
53 Nm
106 Nm
79.5 Nm
1000 rpm
6000 rpm
Commissioning Manual