Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 178

Name
F_100_Key
RapidOvr_1
RapidOvr_25
RapidOvr_50
RapidOvr_100
Noder1
Outputs
Name
LED1_S
LED2_S
LED3_S
LED1_F
LED2_F
LED3_F
Assigned global variables
SP_OV_Switch
USB_MCP_SP_OV
FD_OV_Switch
USB_MCP_FD_OV
USB_MCP_Ra_OV
Relevant PLC machine data
No.
14510 [15]
14510 [16]
14510 [17]
14510 [18]
14512 [20]
14512 [21]
178
Type
BOOL
BOOL
BOOL
BOOL
BOOL
BYTE
Type
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BYTE MB202
BYTE MB209
BYTE MB201
BYTE MB208
BYTE MB220
Unit Range
0.1 s 0.5 s to 3 s
0.1 s 0.1 s to 3 s
0.1 s 0.5 s to 3 s
0.1 s 0.1 s to 3 s
- -
- -
Description
Feedrate override 100% key
Rapid override 1%
Rapid override 25%
Rapid override 50%
Rapid override 100%
Reserved
Description
Lights, spindle override < 100%; flashing, 50%
Lights, spindle override 100%
Lights, spindle override 105-115%; flashing, 120%
Lights, feedrate override < 100%; flashing, 0%
Lights, feedrate override 100%
Lights, feedrate override 105-115%; flashing, 120%
Spindle override switch buffer
USB MCP signal: spindle override
Feedrate override switch gray code
USB MCP signal: feedrate override
USB MCP signal: rapid feedrate
Description
Spindle override 50% key holding on time defined
Spindle override 100% key holding on time defined
Feedrate override 0% key holding on time defined
Feedrate override 100% key holding on time defined
Bit 5: define the spindle override startup value (0: the startup spindle
override is always 100%; 1: recode the spindle override value of the last
machine turn off for the next startup)
Bit 6/7: define the spindle override shift speed
bit 6 = 0, bit 7 = 0
•
Standard speed. The steps are 50%, 55%, 60%, 65%, 70%, 75%,
80%, 85%, 90%, 95%, 100%, 105%, 110%, 115%, 120%
bit 6 = 1, bit 7 = 0
•
Two times the standard speed. The steps are 50%, 60%, 70%, 80%,
90%, 100%, 110%, 120%
bit 6 = 0, bit 7 = 1
•
About three times the standard speed. The steps are 50%, 60%,
70%, 85%, 100%, 110%, 120%
bit 6 = 1, bit 7 = 1
•
About four times the standard speed. The steps are 50%, 60%,
80%, 100%, 120%
Bit 5: define the feedrate override startup value (0: the startup feedrate
override is always 100%; 1: recode the feedrate override value of the
last machine turn off for the next startup)
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018