Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 137

Signal
I3.5 -
I3.6 -
I3.7 -
I4.0 Handheld unit: axis X selected
I4.1 Handheld unit: axis Y selected
I4.2 Handheld unit: axis Z selected
I4.3 Handheld unit: fourth axis selected
I4.4 Handheld unit: increment X1
I4.5 Handheld unit: increment X10
I4.6 Handheld unit: increment X100
I4.7 Handheld unit: enabled
Q0.0 Working lamp
Q0.1 -
Q0.2 Chip forward
Q0.3 Chip backward
Q0.4 Cooling pump
Q0.5 Lubrication pump
Q0.6 Safety door open
Q0.7 -
Q1.0 Magazine rotating clockwise
Q1.1 Magazine rotating counter-clockwise
Q1.2 Magazine approaching spindle position
Q1.3 Magazine approaching original position
Q1.4 Tool release from the spindle
Q1.5 -
Q1.6 -
Q1.7 Handheld unit valid
Definition of user-defined keys on the MCP
User-defined key 1
User-defined key 2
User-defined key 3
User-defined key 4
User-defined key 5
User-defined key 6
User-defined key 7
User-defined key 8
Structure of the sample application (OB1)
Call Conditions
Each scan (SM0.0)
First scan (SM0.1)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Each scan (SM0.0)
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Description
Working lamp
Manual cooling
Safety door
Manual clockwise rotation of the tool magazine
Manual reset of the tool magazine
Manual counter-clockwise rotation of the tool magazine
Removing chip forward
Removing chip backward
Subroutine Name
AUX_MCP (SBR20)
PLC_INI (SBR32)
EMG_STOP (SBR33)
MCP_NCK (SBR37)
HANDWHL (SBR39)
AXIS_CTL (SBR40)
SPINDLE (SBR42)
COOLING (SBR44)
LUBRICAT (SBR45)
Remark
Reserved
Reserved
Reserved
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Valid at a high level
Description
Auxiliary function
PLC initialization
Emergency Stop control
Transferring MCP and HMI signals to
the NCK interface
Selecting a hand wheel through the
interface signal DB1900.DBB1xxx
Coordinate enabling control, hardware
limit, etc.
Spindle control
Cooling control
Lubrication control
137