Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 46
Hide thumbs
Also See for SINUMERIK 808D ADVANCED Series:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
46
9.
Double-click the access point symbol, and the following "Set PG/PC Interface" dialog box is
displayed.
Select "TCP/IP" with the Ethernet card name of your computer and click the "OK" button.
Note: You can find the name of your Ethernet card in the local area connection status under
Control Panel on your computer.
10.
Enter the IP address for the control system in the communication setting window, for exam-
ple:
Note that the IP address entered here must be the same as that you have set on the PPU.
11.
Double-click this symbol in the communication setting window to establish a connection to
the specified IP address.
Wait until the information of the connected control system is identified as follows, and then
the connection is ready.
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Advertisement
Table of Contents
