Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 176

Local variable definition
Inputs
Name
nodef
MgzCnt
MgzRef_k
MgzCW_k
MgzCCW_k
MgzSp_k
MgzOrg_k
MgzSp_pos
MgzOrg_pos
T_rel_pos
T_lck_pos
T_rel_k
T_rel_EnK
Outputs
Name
MgzCW_o
MgzCCW_o
MgzSp_o
MgzOrg_o
SpRelT_o
RelT_En_o
MgzSp_LED
MgzOrg_LED
MgzRef_LED
Assigned global variables
MgzCW_cmd BOOL
MgzCCW_cmd BOOL
Mgz_rot_CMD BOOL
Relevant PLC machine data
No. Unit
14512 [19].3 -
14512 [21].1 -
14514 [2] -
1)
For the first-time commissioning, set MD14514 [2] to an appropriate value so that axis Z can move freely during the
1)
commissioning. When the commissioning is finished, set MD14514 [2] to the normal value.
176
Type
BYTE
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
Type
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
M230.0
M230.1
DB4900.DBB24
Range
-
-
-3.40e38 to 3.40e38
Description
Reserved
Magazine counter
Set current tool no. to 1 in magazine via this key
Magazine CW rotate key
Magazine CCW rotate key
Magazine enter spindle position key
Magazine original position key
Magazine reaches SP position
Magazine reaches original position
Spindle releases tool position
Spindle locks tool position
Spindle release-tool key
Release-tool enable key
Description
Magazine CW rotate output
Magazine CCW rotate output
Magazine approaching spindle position output
Magazine original position output
Spindle releases a tool
Release tool enable lamp
Magazine reaches spindle position
Magazine reaches original position
Set current tool no. to 1 in mag. output
Command for clockwise rotation of the tool magazine
Command for counter-clockwise rotation of the tool magazine
Tool change command from the tool change subroutine
Description
1: to enable the maintenance mode
0: to enable the normal mode
Switch of the I/O interface (0: set I0.0 to I2.7/Q0.0 to Q1.7 as the
standard I/O wiring in the default PLC; 1: set I6.0 to I8.7/Q4.0 to
Q5.7 as the standard I/O wiring in the default PLC)
Tool magazine: tool change position of axis Z
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018