Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 478
Hide thumbs
Also See for SINUMERIK 808D ADVANCED Series:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
5.
6.
Starting/stopping remote control
Proceed through the following steps to start/stop the remote control of the HMI:
1.
2.
478
Set the behavior of the control system when it receives a remote access request.
①
Specify the duration of the following dialog box displaying on the HMI:
The following operations on the HMI are possible when this dialog box appears:
②
Use the following key to select the automatic response for the control system after the
above dialog box disappears with no softkey operations.
Press this softkey to save the settings.
Start the AMM tool and establish an Ethernet connection to the control system (see section
"Connecting with AMM (Page 47)").
Click the
button in the toolbar or select from the main window menu as follows to start the re-
mote control.
Once the remote control has been started, a monitoring window opens showing the HMI screen
contents of the connected control system. You can find a
screen.
Press this softkey to reject the request.
Press this softkey to permit the request.
symbol in the tip area of the HMI
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
Advertisement
Table of Contents
