Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 196

Alarm No. Interface Address
700010 DB1600.DBX1.2
700011 DB1600.DBX1.3
700012 DB1600.DBX1.4
700013 DB1600.DBX1.5
700014 DB1600.DBX1.6
700015 DB1600.DBX1.7
700016 DB1600.DBX2.0
700017 DB1600.DBX2.1
700018 DB1600.DBX2.2
700019 DB1600.DBX2.3
700020 DB1600.DBX2.4
700021 DB1600.DBX2.5
700022 DB1600.DBX2.6
700023 DB1600.DBX2.7
700024 DB1600.DBX3.0
700025 DB1600.DBX3.1
700026 DB1600.DBX3.2
700028 DB1600.DBX3.4
700029 DB1600.DBX3.5
700030 DB1600.DBX3.6
700031 DB1600.DBX3.7
700032 DB1600.DBX4.0
700033 DB1600.DBX4.1
700034 DB1600.DBX4.2
700035 DB1600.DBX4.3
700036 DB1600.DBX4.4
700049 DB1600.DBX6.1
700050 DB1600.DBX6.2
700051 DB1600.DBX6.3
700052 DB1600.DBX6.4
700053 DB1600.DBX6.5
700054 DB1600.DBX6.6
700055 DB1600.DBX6.7
700056 DB1600.DBX7.0
700059 DB1600.DBX7.3
700060 DB1600.DBX7.4
700061 DB1600.DBX7.5
700062 DB1600.DBX7.6
196
Alarm Description
Handheld unit active
Tool clamping timeout
Spindle being braked
Operation not allowed: chuck unclamped
Gear stage change timeout
Gear position signal error
Drives not ready
Chuck operation not allowed: spindle/prog.
running
Cooling motor overload
Coolant level too low
Lubricating motor overload
Lubricant level too low
Turret motor overload
Prog. tool pos. number > max. tool pos. number
Max. tool position number illegal
No tool position signal from turret
Tool change timeout
Tool unclamped
Warning: the 1st maintenance task will expire
Alarm: the 1st maintenance task has expired
Magazine not in spindle pos. or original pos.
Magazine in spindle pos. and original pos.
Magazine rot. failed: magazine/spindle not
ready
Blk search finds tool on spindle <> tool pro-
grammed
Spindle positioning to unclamping position
timeout
Spindle positioning to clamping position timeout
Reference point of X axis not reached
Reference point of Z axis not reached
Spindle direction illegal
Monitoring time for JOG operation exceeded
Spindle override not 100%
Spindle not started
Feed override = 0%
Spindle dir. change not allowed in thread mach.
NC start not possible: safety door not closed
PRT/AFL change not possible: channel not
reset
Mgz. in maint. Read-in & rapid traverse disabled SBR60: Disk_MGZ_M
Tool on spindle <> tool prgd. mgz. must be
referenced
From SBR
SBR41: MINI_HHU
SBR53: Turret3_CODE_T
SBR42: SPINDLE
SBR56: Lock_unlock_T
SBR49: GearChg1_Auto
SBR33: EMG_STOP
SBR56: Lock_unlock_T
SBR44: COOLING
SBR45: LUBRICAT
SBR51: Turret1_HED_T
SBR52: Turret2_BIN_T
SBR53: Turret3_CODE_T
SBR53: Turret3_CODE_T
SBR48: ServPlan
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR60: Disk_MGZ_M
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR58: MM_MAIN
SBR22:
AUX_SAFE_DOOR
SBR37: MCP_NCK
SBR60: Disk_MGZ_M
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018