Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual page 253

+
Note
To restore the default display of "SIEMENS" logo, delete the customized bitmap file (mtbico.bmp) from the control system.
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
8. Move the cursor to the folder highlighted as follows:
9. Press this key to open this folder.
10. Press this softkey to replace the default machine logo file with your own machine logo file.
11. Press these two keys to restart the HMI. Then you can see your own machine logo in the
machining operating area.
253