Commissioning
5.2 Setting the expansion module parameters
5.2
Setting the expansion module parameters
The parameters for the expansion module can be set either directly on the PAC display or via
the communication interface of the PAC device using the SENTRON "powerconfig"
configuration software.
The SENTRON powerconfig configuration software can be downloaded from the Industry
Online Support website (https://support.industry.siemens.com/cs/at/en/view/63452759).
Setting parameters on the PAC device
In the menu "EXPANSION MODULES", call the "I(N) I(DIFF) ANALOG" that you want to
configure and then select menu item "SETTINGS".
26
Equipment Manual, 05/2020, L1V30408520AG-03