To upload a PLC project using a USB memory stick or the network drive, proceed as follows:
+
190
6.
Click this button and you can view the upload results.
1.
To upload the PLC project via USB, insert the USB memory stick into the USB interface
•
at the front of the PPU.
To upload the PLC project via network drive, connect the network drive via Ethernet
•
connection (Page 230).
2.
Select the system data operating area on the PPU.
3.
Open the system data window through the following softkey operations:
→
4.
Move the cursor to select the following folder and press this key to open it:
5.
Select the machine manufacturer's PLC project file (.pte) and press this softkey to copy.
6.
Paste the copied file into the desired storage directory through the following softkey opera-
tions:
/
→
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018