Subroutine 21 - Aux_Lamp (Working Lamp); Subroutine 22 - Aux_Safe_Door (Safety Door) - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual

6.6.4

Subroutine 21 - AUX_LAMP (working lamp)

Purpose
Subroutine 21 is used to control working lamp and can be called in AUX_MCP. One-time pressing of the "LAMP" key
activates the working lamp while double pressing de-activates the working lamp.
Local variable definition
Inputs
Variable Type
nodef BYTE
LampK BOOL
Outputs
Variable Type
LampLED BOOL
LampOut BOOL
Relevant PLC machine data
No.
14512 [21].1
Example for calling subroutine 21
6.6.5

Subroutine 22 - AUX_SAFE_DOOR (safety door)

Purpose
Subroutine 22 is used to control the safety door and can be called in AUX_MCP.
If you open the safety door, that means you activate the spindle speed limiting function, with the speed limit being specified
in MD35160.
Local variable definition
Inputs
Variable Type
nodef BYTE
DoorK BOOL
IsDoorCls BOOL
M1_2_OpDoor BOOL
Outputs
Variable Type
DoorOp BOOL
DoorLED BOOL
MsgDoorNotCls BOOL
144
Description
Reserved
Lamp on/off key
Description
Lamp status
Lamp output
Description
Switch of the I/O interface (0: set I0.0 to I2.7/Q0.0 to Q1.7 as the standard I/O wiring in
the default PLC; 1: set I6.0 to I8.7/Q4.0 to Q5.7 as the standard I/O wiring in the default
PLC)
Description
Reserved
Door control key
Signal: door is closed
Open door when M01/M02 is active
Description
Door open output
Door status
Message for door open
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018