Huawei EchoLife HG861 Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Network Hardware
  5. EchoLife HG861
  6. Manual
Huawei EchoLife HG861 Manual

Huawei EchoLife HG861 Manual

Gpon terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

EchoLife HG861 GPON Terminal
V100R001
Issue
01
Date
2009-07-30
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Advertisement

Table of Contents
loading

Related Manuals for Huawei EchoLife HG861

Summary of Contents for Huawei EchoLife HG861

  • Page 1 EchoLife HG861 GPON Terminal V100R001 Issue Date 2009-07-30 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 2 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com...

  • Page 3: Table Of Contents

    3.4.3 Upgrading the ONT (from the OLT Side).....................3-7 3.4.4 Collecting the Fault Information (from the OLT Side)................3-7 4 ONT Downstream User Guide....................4-1 4.1 Using the STB..............................4-2 4.2 Using the PC..............................4-2 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 4 5.3.6 CATV LED Is Off..........................5-11 5.4 FAQs................................5-11 5.4.1 FAQs About Configuration........................5-12 5.4.2 FAQs About Operation and Maintenance....................5-13 6 Technical Specifications......................6-1 6.1 Physical Specifications............................6-2 6.2 Protocols and Standards..........................6-2 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 5 Figure 5-2 Appearance of the PPM-350B......................5-6 Figure 5-3 Schematic diagram of measurement points of optical power in the GPON........5-6 Figure 5-4 Measurement interface of the optical power meter................5-7 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 Table 5-1 Fault Location and Possible Cause......................5-3 Table 5-2 Indexes related to the light on the GPON ONT side................5-6 Table 5-3 Optical loss parameter table used in the engineering................5-7 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: About This Document

    About This Document Overview EchoLife HG861(represented by HG861) is an indoor optical network terminal (ONT) at the gigabit-capable passive optical network (GPON) user access layer, designed for home users and SOHO users. This document provides the appearance, functions, features, and specifications, and describes the installation, configuration and usage of the HG861, which helps you to know the HG861 well.
  • Page 10 Indicates a tip that may help you solve a problem or save your time. Provides additional information to emphasize or supplement important points of the main text. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 11 GUI elements such as buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK. > Multi-level menus are separated by >. For example, choose File > Create > Folder. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 Updates on the document are described in the update history. Therefore, the latest document contains all updates made to previous versions. Updates in Issue 01 (2009-07-30) This is the second release for the HG861 V100R001. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 13: Safety Precautions

    Instruction for Use Use the accessories delivered with the device, or use those recommended by the vendor, such as the power adapter and battery. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 14 Put the waste device and batteries to the specified recycle place. Abide by the local laws and regulations to handle the packaging materials, run-out batteries and waste devices. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 15: System Overview

    This topic provides the appearance and describes the ports and LEDs of the HG861. 2.2 Typical Network Application This topic describes the typical network application of the HG861. 2.3 Installation Guide This topic describes how to install the HG861. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 16: Product Introduction

    This topic provides the LED appearance and describes the indications of the LEDs on the HG861. 2.1.1 Appearance This topic provides the appearance of the HG861. Figure 2-1 shows the appearance of the HG861. Figure 2-1 Appearance of the HG861 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 17: Ports

    This topic provides the LED appearance and describes the indications of the LEDs on the HG861. Figure 2-3 shows the LEDs on theHG861. Figure 2-3 LEDs of the HG861 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 18: Table 2-2 Indications Of The Leds On The Hg861

    The HG861 is in the SN Blinks (quickly) Blinks (slow) authentication state. The HG861 is in the Blinks (quickly) ranging state. The HG861 is in the operation state (normal working state). Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 19: Typical Network Application

    2.2 Typical Network Application This topic describes the typical network application of the HG861. Figure 2-4 shows the network application of the HG861. Figure 2-4 Network application of the HG861 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 20: Installation Guide

    File Transfer Protocol (FTP), and the in-service upgrade through OMCI. 2.3 Installation Guide This topic describes how to install the HG861. 2.3.1 Fastening the HG861 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 21: Fastening The Hg861

    HG861. CAUTION Make sure that the mounting screws are installed in the wall reliably. Figure 2-5 Layout of the mounting holes at the bottom of the HG861 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 22: Connecting Cables

    Before connecting the cables, disconnect the power supply of all the devices to be connected to the HG861, such as the PC and IP STB. Context Figure 2-6 shows the connections of the HG861. Figure 2-6 Connections of the HG861 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Local Manual Upgrade Through The Web Page

    PC to one network port of the HG861 Ensure that the maintenance PC can ping the maintenance IP address of the HG861 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 24: Service Overview

    2.3.4 Service Overview The HG861 supports the video and data services. The HG861 can be connected to the PC through the Ethernet port to implement the Internet access. 2-10 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 25 EchoLife HG861 GPON Terminal 2 System Overview Issue 01 (2009-07-30) Huawei Proprietary and Confidential 2-11 Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Configuration Guide

    Before maintaining the HG861, make sure that you have mastered the usage of command lines, which is a means to configure the device. 3.4 Maintaining the ONT Through the CLI This topic describes how to maintain the ONT through the CLI. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 28: Omci Protocol

    ONT to the ONT through the OMCI channel, and the ONT uploads its status and alarm information to the OLT through the OMCI channel. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 29: Configuring The Service Through The N2000 Bms

    Step 3 On the GPON ONU tab page, set the querying criteria to display the required GPON ONUs. Step 4 Select a required ONU from the list, right-click, and then choose Upgrade Terminal. NOTE The NMS version is R12C03. ----End Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Collecting The Fault Information

    A pane represents a command mode. An arrow indicates the switching from one mode to another mode. The switching commands are listed near the arrows. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Common Commands

    3.4.1 Setting Up a Maintenance Environment (Local) 3.4.2 Upgrading the ONT (from the Local Device) This topic describes how to remotely upgrade the ONT through the CLI on the local device. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 32: Setting Up A Maintenance Environment (Local)

    Step 2 Log in to the system. Use the telnet terminal of the maintenance PC to telnet the maintenance IP address of the HG861. Log in with user name root and password admin, and enter the CLI, as shown in the following figure. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 33: Upgrading The Ont (From The Olt Side)

    3.4.4 Collecting the Fault Information (from the OLT Side) Context When the GPON service is faulty, you need to collect the fault information through the CLI, as described in Table 3-2. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Table 3-2 Collecting Fault Information About The Gpon Service

    NOTE This command is applicable to only the ONTs of the V800R005 and V800R006C02 versions in the distributed mode at the CO end. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 35 Cause of the ONT display ont failed-configuration configuration failure NOTE This command is applicable to only the ONTs of V800R006C02 version in the distributed mode at the CO end. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 37: Ont Downstream User Guide

    This topic describes how to configure the PC connected to the HG861 in the downstream direction. 4.3 Using the CATV This topic describes how to configure the TV set connected to the HG861 in the downstream direction. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Using The Stb

    Step 3 Configure the IP address of the PC. There are three methods for configuring the IP address of the PC.: Configuring the static IP address Obtaining the IP address dynamically through the DHCP server. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 39: Using The Catv

    Step 2 Turn on the power supply. Power on the HG861 and TV set. Step 3 Enjoy the high-speed video service. Watch the program according to the prompt. ----End Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 41: Troubleshooting

    This topic describes how to locate a fault according to the status of the LEDs on the HG861. 5.4 FAQs FAQs include faults that occur on the HG861 and the corresponding solutions. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 42: Fault Identification

    Check the upper-layer device status Procedure Step 1 Locating a Fault Preliminarily Find the fault location and the cause of the fault. Table 5-1shows the locating procedure. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 43: Table 5-1 Fault Location And Possible Cause

    The NAT conversion function for the bound WAN port is not enabled. The LAN port is a L2 port, but the PC does not obtain the public network address. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 Check whether the traffic stream configuration is correct. Check whether an upstream port is bound to the VLAN. Step 6 Checking the Upper-layer Device Status: Check whether the OLT is normal. ----End Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 45: Troubleshooting Preparations

    1310 nm, 1490 nm, and 1550 nm in the GPON. Figure 5-2 shows the apperance of the PPM-350B. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 46: Figure 5-2 Appearance Of The Ppm-350B

    1310-nm wavelength, and receive sensitivity of the 1490 nm wavelength. Table 5-2 lists related indexes. Table 5-2 Indexes related to the light on the GPON ONT side Parameter Type Wavelength (nm) Unit Upstream data 1310 +0.5 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 47: Figure 5-4 Measurement Interface Of The Optical Power Meter

    Table 5-3 Optical loss parameter table used in the engineering Board Name Average Loss (dB) Connecting point Connector Mechanical connection Fusion splicing Optical splitter 1:64 19.7 1:32 16.5 Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 48: Locating Faults Based On The Leds On The Gpon Ont

    This topic describes how to locate a fault when the CATV LED is off. 5.3.1 Power LED Off This topic describes how to locate a fault when the Power LED is off. Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 49: Link Led Off

    Therefore, check whether the input optical power is correct. 5.3.4 LINK LED and AUTH LED Blink This topic describes how to locate a fault when the LINK and AUTH LEDs blink repeatedly. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 50: Lan Led Is Off

    { desc<K>|portid<U><0,3> }:0 { <cr>|gemportid<K> }:gemportid 184 Command: display gemport 0 gemportid 184 ------------------------------------------------------------------ GEM port ID Serv-Type Encrypt Cascade Loopback ------------------------------------------------------------------ ETHERNET no loopback ------------------------------------------------------------------ 5-10 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

  • Page 51: Catv Led Is Off

    If the maintenance IP address of the ONT cannot be pinged, repeat step 4 on another network port. Step 6 If the fault persists, it indicates that the LSW circuit in the board is faulty. Please contact Huawei customer service center.

  • Page 52: Faqs About Configuration

    Q: What are functions of setting min-distance and max-distance for a GPON port? huawei(config-if-gpon-0/12)#port 1 range min-distance 10 max-distance 15 Run the preceding command to set the min-distance and max-distance for ranging between the OLT and the ONT. The OLT opens windows to receive a ranging response from the ONT.

  • Page 53: Faqs About Operation And Maintenance

    0 1 hwhw-11111111 sn-auth profile-id 2 Q: What are functions of setting min-distance and max-distance for a GPON port? huawei(config-if-gpon-0/12)#port 1 range min-distance 10 max-distance 15 Run the preceding command to set the min-distance and max-distance for the ranging between the OLT and an ONT.
  • Page 54 Q: What are the specifications of the upstream VLANs and user VLANs of the MA5680T? A: The specifications of the upstream VLANs and user VLANs of the MA5680T are as follows: 5-14 Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.
  • Page 55 A: The GPON protocol processes the upstream traffic in the TDM mode. The duration of encapsulating a frame is 125 us. During the periodical ranging of ONTs connected to one Issue 01 (2009-07-30) Huawei Proprietary and Confidential 5-15 Copyright © Huawei Technologies Co., Ltd.
  • Page 56 When the .IMAGE file is upgraded, the BIOS and user programs are upgraded. – When the .BIN file is upgraded, the BIOS is not upgraded. – Currently, ONTs of Huawei's use .BIN file for upgrade. 5-16 Huawei Proprietary and Confidential Issue 01 (2009-07-30)

  • Page 57: Technical Specifications

    The physical specifications of the HG861 include its dimensions, weight, voltage range, and environmental parameters. 6.2 Protocols and Standards This topic describes the protocols and standards that the HG861 interface must comply with. Issue 01 (2009-07-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 58: Physical Specifications

    Humidity range: 5% to 95% (non-condensing) 6.2 Protocols and Standards This topic describes the protocols and standards that the HG861 interface must comply with. GPON: ITU-T G.984.x GE: IEEE802.1p, IEEE 802.3ab, IEEE802.1q Huawei Proprietary and Confidential Issue 01 (2009-07-30) Copyright © Huawei Technologies Co., Ltd.

Table of Contents