Installing The New 3.5-Inch Hdd Sas Backplane - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

7.3.6.3

Installing the new 3.5-inch HDD SAS backplane

Figure 63: Installing the 3.5-inch HDD SAS backplane
Ê Fit the SAS backplane into the guide on the outer wall of the HDD bay and
lower it into the bottom rim (see close-up).
Ê Ensure that the SAS backplane is properly seated into the bottom rim and
side guide (see circles).
TX140 S2
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
145