Redundant Power Supply; Installing A Hot-Plug Psu - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
▶
"Performing a fan test" on page
6.4

Redundant power supply

6.4.1

Installing a hot-plug PSU

Customer Replaceable
Unit (CRU)
Tools: Tool-less
Preliminary steps
No steps needed.
Removing the dummy cover
Figure 66: Removing the dummy cover
▶ Press in on both release latches (1) and remove the dummy cover (2).
TX1330 M4
79.
81.
130.
Upgrade and Maintenance Manual
Power supply unit (PSU)
121.
Hardware: 5 minutes
145