● Actions after assembly
Execute Auto Correct Color Mismatch.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Correct Color Mismatch
Removing the Main Drive Unit
■ Preparation
1.
"Removing the Rear Cover 1" on page 140
2.
"Removing the Left Upper Cover" on page 144
3.
"Removing the Fax Speaker Unit" on page 214
4.
"Removing the Fax Unit" on page 214
5.
"Removing the Main Controller Unit" on page 189
6.
"Removing the Low-voltage Power Supply Unit" on page 201
7.
"Removing the DC Controller PCB" on page 194
■ Procedure
1. Pull the Right Cover Open/Close Lever [1], and open the Right Cover Unit [2].
2. Remove the Main Drive Unit [1].
• 6 Screws [2]
6x
[2]
[1]
[2]
[2]
[1]
[2]
240
4. Parts Replacement and Cleaning
[2]
[2]