Child Safety Lock; Central Door Lock System - MG Hector Owner's Manual

KEYS, DOORS AND WINDOWS
As shown in the figure above, open the right
front door and two rear doors, and find the
internal knobs of locks (not the knob of child
safety lock).
Rotate the knobs outward with a key, and
close the doors. At last, pull the external
handles to ensure that the doors are locked.
At this time, please pull the internal handle
once first if you want to open the door.
For the left front door, please plug the key in
the external door handle and rotate the key
clockwise to lock the door. Please refer to the
content in the Subsection "External Door
Locking and Unlocking".
Note
If there is noise while opening/closing
doors or driving, apply lubricating grease
on the door catches and hinges.
16

Child Safety Lock

The rear doors are equipped with child safety
locks.
The function of the child safety lock is to
prevent passengers (especially children) from
pulling the door handle to open the rear door.
Note
The two rear doors are equipped with a
child safety lock respectively. They
f u n c t i o n s e p a r a t e l y a n d m u s t b e
activated manually and respectively.
Note
When the child safety lock is activated,
do not attempt to pull the internal door
handle to open the door. Otherwise, the
door handle may be damaged.
To activate the child safety lock:
1. Open the rear door that you want to lock.
2. Find the child safety lock hole on the door
edge and near the middle position.
3. Plug the key and rotate as per the arrow to
the lock position.
When the child safety lock is activated, you
need to pull the external door handle to open
the door. To deactivate the child safety lock,
please plug the key and rotate to the unlock
position.

Central Door Lock System

The central door lock system enables you to
lock and unlock all doors with the remote
control or the central door lock switch from
inside.