Bulb Replacement; Bulb Specification - MG Gloster Manual

Bulb Replacement

Before replacing any bulb, tum off the ignition switch and lighting
switches to avoid any possible short circuit. When removing or
installing the bulb, do not touch the bulb with hands. If touched, wipe
away the hand print with a piece of cloth or alcohol.
The bulb replacement must be identical with the original one in type
and specification.

Bulb Specification

Bulb
Low/high beam
Front turning signal lamp
Front fog lamp
Rear turning signal lamp (type I)
Reverse lamp (type I)
Brake lamp/rear width lamp (type I)
Rear turning signal lamp (type II)
Reverse lamp (type II)
License plate lamp
Front ceiling reading lamp
Rear ceiling reading lamp
202
EMERGENCY TROUBLESHOOTING
Specification
HIR2
PY21W
H11
PY21W
W21W
P21/5W
WY21W
W21W
W5W
W5W
W5W