Rear Seat; Rear Seat (5-Seat Model); Armrest; Middle Row Seat - MG Hector Owner's Manual

SEATS AND PROTECTIVE DEVICES
To recover, pull up the drawstring and unfold
the backrest to a proper angle. Finally, try to
shake the backrest to check whether it is fixed.
Note
Hold the backrest first and do not make
the head or other body parts within the
backrest folding range before pulling the
backrest drawstring and folding the
backrest. Otherwise, the backrest will be
folded quickly and may cause impact or
injuries.
38

Rear Seat

Rear Seat (5 Seat Model)
Rear seat cannot be adjusted forward or
backward.

Armrest

As shown in the figure, the second row seat is
configured with an armrest. Deploy the
armrest for use. There is a cup holder on the
armrest. After use, please put back the

armrest.

Seat Position and Backrest Angle for
Measurement of Seat Cushion Thickness. For
measurement of the seat cushion thickness,
the seat can be in any position.
The seat backrest shall incline backward for a
certain angle from the vertical position. The
angle is 23°, 25° and 20° respectively for the
1st and 2nd row.

Middle Row Seat

As shown in the figure, after the cushion is
unlocked, pull out the cushion forward and lift
up the rear part of the cushion to overturn it.
The two cushions can all be overturned.
To recover, install the cushion back in
opposite order, and press down the cushion
with force. Try to shake the seat cushion to
make sure that it is locked.