STARTING AND DRIVING
Re-priming:
In the event of diesel fuel discontinuity (change of filter)
• Manually prime filter until pump goes solid;
• Crank engine for 3 seconds;
• Pump again until solid;
• Crank until engine fires (3 seconds maximum).
Water-in fuel sensor:
In the event of the water-in-fuel warning light illuminating
on the instrument pack proceed to the nearest garage for
water to be drained from the filter. Note that water/diesel
emulsion should not be discharged to ground.
After refuelling, if the engine runs unevenly, switch off and
seek an MG Authorised Repairer before attempting to
restart the engine.
134
Inertia Switch
ALWAYS check for fuel leaks before resetting
the inertia switch.
In the event of a collision or sudden impact, the inertia
switch automatically cuts off the fuel supply to the engine,
unlocks the doors and turns the interior lights on. In