Figure 27: Enter New Address - WAGO -I/O-IPC-C6 Manual

62 Commissioning
5. Enter the new IP address for the selected Ethernet interface and confirm it
with [OK]. If you want to return to the main menu without making changes,
select [Abort].

Figure 27: Enter new address

You cannot assign IP addresses for both Ethernet interfaces in the same subnet.
Neither can you do this with the BootP or DHCP server.
Pos: 41.6 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Note
WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Manual
Version 2.3.0