Integrated Inputs And Outputs (X5); Table 15: Digital Inputs And Outputs: Pin Assignments - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Pos: 34.6 /Serie 758 (Funk, IPC und PFC)/Beschreibung der Schnittstellen/Beschreibung der Schnittstellen 758-87x (onBoard I/Os, USB, ...) Einleitung @ 10\mod_1312375295737_21.doc @ 75820 @ 2 @ 1
5.3

Integrated Inputs and Outputs (X5)

The 12-pole D-sub connector provides two integrated digital inputs and two
outputs. These are used to connect sensors or actuators that are to be used
independently of the internal data bus.
Integrated inputs and outputs for use only shielded cables!
Remember when using the integrated inputs and outputs that these do not fulfill
the requirements of the IEC-61131-2. Only the connection of screened lines is
permitted.
The following table provides information on the configuration of the integrated
inputs and outputs:
Pos: 34.7 /Serie 758 (Funk, IPC und PFC)/Beschreibung der Schnittstellen/Beschreibung der Schnittstellen 758-87x (onBoard I/Os, USB, ...) Anschlussbelegung @ 10\mod_1314943165459_21.doc @ 78018 @ @ 1

Table 15: Digital Inputs and Outputs: Pin Assignments

Connector
10 11 12 13 14
9
1 2 3
Pos: 34.8 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 2.3.0
Pin
1
2
3
4
5
6
7
15
8
4 5 6 7 8
9
10
11
12
13
14
15
Description of I/O-IPC Interfaces
Description
DIN0+
DIN1+
DOUT0+
DOUT1+
Not assigned
Not assigned
Not assigned
Not assigned
DIN0-
DIN1-
DOUT0-
DOUT1-
Not assigned
Not assigned
Not assigned
31