Access Over Telnet; Figure 69: Dos Console 1; Figure 70: Dos Console 2 - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Pos: 48.7 /Serie 758 (Funk, IPC und PFC)/Betriebssystem/Betriebssystem Linux 758-87x IPC - Zugriff über Telnet @ 11\mod_1315392988383_21.doc @ 78770 @ 4 @ 1
13.4.1.1

Access over Telnet

In order to access the I/O-IPC over Telnet, use a terminal program such as
minicom (under Linux) or hyper terminal (under Windows).
For use of the hyper terminal, the following settings in the login interface have to
be adapted:
Host address: IP address of the ETHERNET interface of the I/O-IPC used
Connect via: TCP/IP
On top of that, you can also access the I/O-IPC through the textual console of
Linux or MS-DOS using Telnet. This procedure is described below:
Pos: 48.8 /Serie 758 (Funk, IPC und PFC)/Betriebssystem/Betriebssystem Linux 758-87x IPC - Zugriff über Telnet, Schritt 1 @ 11\mod_1315392997759_21.doc @ 78773 @ @ 1
1. Connect the X9 ETHERNET interface of the I/O-IPC to your PC through an
ETHERNET patch cable.
Pos: 48.9 /Serie 758 (Funk, IPC und PFC)/Betriebssystem/Betriebssystem Linux 758-87x IPC - Zugriff über Telnet, Schritte 2 - 5 @ 11\mod_1315393074509_21.doc @ 78779 @ @ 1
2. Open a console of your PC.
3. Enter the command

Figure 69: DOS console 1

4. Enter your user name (See chapter "Access to the Linux console").

Figure 70: DOS console 2

5. Enter the password for your user. The Linux console of the I/O-IPC opens
in the HOME directory (
Pos: 48.10 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 2.3.0
telnet <IP-ADRESSE des I/O-IPC>
~
) of the selected user.
Operating System 145
.