Interface For Electronic Power Supply (X4); Table 14: Interface For Electronic Power Supply: Pin Assignments - WAGO -I/O-IPC-C6 Manual

30 Description of I/O-IPC Interfaces
Pos: 34.4 /Serie 758 (Funk, IPC und PFC)/Beschreibung der Schnittstellen/Beschreibung der Schnittstellen 758-87x Elektronikversorgung @ 10\mod_1314943943948_21.doc @ 78033 @ 2 @ 1
5.2

Interface for Electronic Power Supply (X4)

Feed the electronic power supply for the I/O-IPC and for the I/O modules
connected to the internal data bus in through this interface.
Electric voltage!
Only operate the I/O-IPC with 24VDC PELV- (Protective Extra Low Voltage) or
SELV (Safety Extra Low Voltage) power sources. There is a danger of electric
shock if this precaution is not observed.

Table 14: Interface for Electronic Power Supply: Pin Assignments

Connector
3
Pos: 34.5 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
DANGER
Pin
1
2 1
2
3
758-874/000-110 WAGO-I/O-IPC-C6
Description
V_IN (+)
GND (-)
Shield (optional)
WAGO-I/O-SYSTEM 750
Manual
Version 2.3.0