Table 125: Description Of The Configuration Scripts For "Hmi Settings - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6

Table 125: Description of the configuration scripts for "HMI Settings"

Parameter
HMI Settings
Screensaver
Display Status
Manual
Version 2.3.0
Status Call
get_touchscreen_config
read
display-state
change_screen_state
write
display-state=<value>
Appendix
Output/Input
on – display is turned on
(screensaver is off).
off – display is switched off
(screensaver is on).
<value>=on – switches the
display on immediately.
<value>=off – turns the
display off immediately.
Switching the display
on/off takes place
independently of the
screensaver activation.
Whether the displace is
turned off again after a wait
time, or is turned on again
after contact at the touch
screen, depends on whether
the screensaver function is
activated (see next point).
223
Validity
immediate