Figure 37: Designing A New Function Block; Figure 38: Programming Interface With The Program Function Block Plc_Prg - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
5. Create a program function block in the "New POU" window. In this
example, a new function block, "PLC_PRG", is created in the "ST"
programming language.
6. Click on [OK] to create the project. The programming interface opens.

Figure 37: Designing a new function block

Figure 38: Programming interface with the program function block PLC_PRG

Manual
Version 2.3.0
CoDeSys 2.3 Runtime Environment 99