WAGO -I/O-IPC-C6 Manual page 107

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
4. Enter the IP address of your I/O-IPC in the "Address" field in the
"Communication Parameters" window and then press the enter key on your
PC keyboard. To close the window, click in the window on [OK].
To select an already created I/O-IPC, select it in the left window and then
click on [OK].
Figure 15: Creating a new communication channel
5. Transfer the PLC program by clicking on Online in the menu bar and select
Login.
6. Remember that the I/O-IPC's Run/Stop switch must be in the "Run"
position.
7. Start the PLC program by clicking on Online in the menu bar and selecting
Run.
Manual
Version 2.3.0
CoDeSys 2.3 Runtime Environment 107