Channel Digital Output Modules With Diagnostics And Input Process Data; Channel Digital Output Modules; Table 84: 8 Channel Digital Output Modules With Diagnostics And Input Process Data; Table 85: 16 Channel Digital Output Modules - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
17.2.2.7 8 Channel Digital Output Modules with Diagnostics and Input
Process Data
750-537
The digital output modules have a diagnostic bit for each output channel. When an
output fault condition occurs (i.e., overload, short circuit, or broken wire), a
diagnostic bit is set. The diagnostic data is mapped into the Input Process Image,
while the output control bits are in the Output Process Image.

Table 84: 8 Channel Digital Output Modules with Diagnostics and Input Process Data

Input Process Image
Bit 7
Diagnostic
bit
S 8
Channel 8
Diagnostic bit S = '0'
Diagnostic bit S = '1'
Output Process Image
Bit 7
controls
DO 8
Channel 8
17.2.2.8

16 Channel Digital Output Modules

750-1500, -1501, -1504, -1505

Table 85: 16 Channel Digital Output Modules

Output Process Image
Bit 15 Bit 14Bit 13Bit 12Bit 11Bit 10Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
control
controls
s
DO 16
DO 15
Channel
Channe
16
l 15
Manual
Version 2.3.0
Bit 6 Bit 5
Diagnostic Diagnostic
bit bit
S 7 S 6
Channel 7 Channel 6
no Error
overload, short circuit, or broken wire
Bit 6 Bit 5
controls controls
DO 7 DO 6
Channel 7 Channel 6
control control control control
s DO s s s
14 DO 13 DO 12 DO 11
Channe Channe Channe Channe
l 14 l 13 l 12 l 11
Bit 4 Bit 3
Diagnostic Diagnostic
bit bit
S 5 S 4
Channel 5 Channel 4
Bit 4 Bit 3
controls controls
DO 5 DO 4
Channel 5 Channel 4
control control control
controls
s s s
DO 10
DO 9 DO 8 DO 7
Channel
Channe Channe Channe
10
l 9 l 8 l 7
I/O Modules
Bit 2 Bit 1
Diagnostic Diagnostic
bit
bit
S 3 S 2
Channel 3 Channel 2
Bit 2 Bit 1
controls controls
DO 3 DO 2
Channel 3 Channel 2
control control control control
s s s s
DO 6 DO 5 DO 4 DO 3
Channe Channe Channe Channe
l 6 l 5 l 4 l 3
193
Bit 0
Diagnostic
bit
S 1
Channel 1
Bit 0
controls
DO 1
Channel 1
control control
s s
DO 2 DO 1
Channe Channe
l 2 l 1