Figure 42: I/O Configuration 2 - WAGO -I/O-IPC-C6 Manual

102 CoDeSys 2.3 Runtime Environment
5. You can change the position of an I/O module in the right window by
marking it and then moving it up or down using the arrow button on the
right edge of the window.
6. It is possible, using [Import], to import a configuration previously read in
with WAGO-I/O-CHECK.
7. To close the I/O Configuration, click [OK].

Figure 42: I/O configuration 2

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Manual
Version 2.3.0