Overview Of Physical Interfaces; Figure 1: Overview Of Interfaces - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Pos: 32.10 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Anschlüsse/Anschlüsse 758-87x ohne Feldbus - Bild @ 10\mod_1313390563107_21.doc @ 76827 @ 2 @ 1
Übersicht der physikalischen Schnittstellen
4.1

Overview of Physical Interfaces

1
11
10
9

Figure 1: Overview of interfaces

Pos: 32.11 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Anschlüsse/Anschlüsse 758-87x allgemein -Tabelle 1 @ 10\mod_1312355635368_21.doc @ 75620 @ @ 1
Position
1
2
3
4
5
6
7
Pos: 32.12 /Serie 758 (Funk, IPC und PFC)/Gerätebeschreibung/Anschlüsse/Anschlüsse 758-87x - Tabelle 3 ohne FB @ 10\mod_1313150275609_21.doc @ 76710 @ @ 1
8
9
10
11
Pos: 32.13 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Manual
Version 2.3.0
3
4
2
Run
Stop
RST
8
Description
USB interface (X10),
Type A
USB interface (X11),
Type A
Ethernet interface (X8),
RJ-45
Ethernet interface (X9),
RJ-45
I/O module interface
750-602 Power Supply Module
Slot for CF card
DVI interface (X7),
D-sub socket, 24+5
Interface for electronic supply (X4)
Integrated input and output (X5),
15-pole D-sub socket
Serial RS-232 interface (X6),
9-pole D-sub plug
Device Description
Function
To connect USB devices such as, keyboards,
USB memories, etc.
Interfaces to connect the I/O-IPC to a
ETHERNET Network.
Data exchange over the internal data bus
Infeed of the field supply (sensors/actuators).
Slot for CF cards, type I and II.
To connect a digital or analog monitor. A "DVI
to VGA" adapter is required to connect a monitor
via a VGA cable.
Power supply for the 24 V electronic supply of
the I/O-IPC. The power supply is protected
against reverse polarity.
Interface for connecting direct digital signal
generators.
Physical connection to the Linux console,
MODBUS/RTU, IO-Check or CoDeSys.
This interface can be configured via Web-based
management or Linux console.
19
5 6
A A
C C
B
B
D D
7