Table 123: Description Of The Configuration Scripts For "Ntp - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6

Table 123: Description of the configuration scripts for "NTP"

Parameter
NTP
Configuration Data
State
Port
Time Server
Update Time
(seconds)
Manual
Version 2.3.0
Status Call
get_ntp_config
read
state
config_sntp
write
state=<value>
get_ntp_config
read
port
config_sntp
write
port=<value>
get_ntp_config
read
time-server
config_sntp
write
time-server=<value>
get_ntp_config
read
update-time
config_sntp
write
update-time=<value>
Appendix
Output/Input
Entries for <value> are:
enabled
disabled
Entries for <value> are:
enabled
disabled
Port number of the NTP
server
Specify the port number for
<value>.
Query the IP address of the
Time server.
Enter the IP address of the
Time server. The <value>
can contain an IP address in
the format
number.number.number.
number or a domain name
as a string.
Query of the polling cycle
of the Time server.
Specify the time-server's
query cycle (in s) for
<value>.
221
Validity
immediate