Editing A Program Function Block; Figure 45: Program Function Block; Figure 46: Input Assistant For Selecting Variables - WAGO -I/O-IPC-C6 Manual

104 CoDeSys 2.3 Runtime Environment
11.5.4

Editing a Program Function Block

To edit the program component PLC_PRG, change to the "POUs" tab and double
click on the program function block PLC_PRG.

Figure 45: Program function block

The following example is intended to illustrate the editing of the program function
block. To do this, an input is assigned to an output:
1. Press [F2] to open the input assistant or right click and select the "Input
Assistant..." context menu.

Figure 46: Input assistant for selecting variables

2. Select the previously declared variable "K-Bus_Do_01" under "Global
Variables" and click to on [OK] to add it.
3. Enter the assignment:= behind the variable name.
4. Repeat step 2 for the variable "K-Bus_DI_01".
WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Manual
Version 2.3.0