WAGO -I/O-IPC-C6 Manual page 225

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Table 125: Description of the configuration scripts for "HMI Settings"
Parameter
Cleanmode
Status
Cleanmode
Timeout
VGA-Configuration
Video Mode
Show Mouse
Pointer
Manual
Version 2.3.0
Status Call
get_touchscreen_config
read
cleanmode-state
change_screen_state
write
cleanmode-state=<value>
get_rts3scfg_value
read
CLEANMODE Timeout
change_rts_config
write area=CLEANMODE
Timeout=<value>
show_video_mode
read
string
change_video_mode
write
video-string=<value>
get_touchscreen_config
read
mouse-pointer
config_mousepointer
write show-mouse-
pointer=<value>
Appendix
Output/Input
on – Cleanmode is
currently switched on, i.e.
contacts on the touch screen
will be ignored for the
duration of the set timeout
time. A note image is
displayed on the screen.
off – Cleanmode is
currently not switched on,
contacts on the touch screen
will be processed.
<value>=on: – cleanmode
is activated for the time
duration entered in timeout.
<value>=off: – if
cleanmode is active at this
time, it is switched off
again without waiting for
the runout of the timeout
time.
Returns the set timeout
value of the cleanmode in
seconds, i.e., when
cleanmode is activated, user
inputs at the touch screen
will be ignored for this time
duration.
<value>=integer, time
value in seconds.
Changes the timeout value
of cleanmode.
Display of the configured
video mode (resolution and
color depth).
Change video mode:
Possible entries for <value>
are e.g.:
640x480+256+color
800x600+16+bit
1024x768+32+bit
(according to supported
resolution and color depth)
Mouse pointer setting
visible:
yes
no
Change mouse pointer
setting. Possible entries for
<value>:
yes
no
225
Validity
immediate
immediate
after restart
immediate
after restart