WAGO -I/O-IPC-C6 Manual page 109

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Figure 15: Creating a new communication channel (RS 232) 2
6. Enter the following communication parameters of the RS-232 interface:
•
•
•
•
•
7. Transfer the PLC programs by clicking on Online in the menu bar and
select Login.
8. Remember that the I/O-IPCs Run/Stop switch must be in the "Run" position.
9. Start the PLC program by clicking on Online in the menu bar and selecting
Run.
Manual
Version 2.3.0
Baud rate: 115200 bit/sec
Parity: Even
Stop Bits: 1
Motorolla Byteorder: No
Flow Control: Off
CoDeSys 2.3 Runtime Environment 109