WAGO -I/O-IPC-C6 Manual page 224

224 Appendix
Table 125: Description of the configuration scripts for "HMI Settings"
Parameter
Screensaver
Status
Screensaver
Wait Time
Status Call
get_rts3scfg_value
read SCREENSAVER
Enabled
change_rts_config
write area=SCREENSAVER
state=<value>
get_rts3scfg_value
read
SCREENSAVER
WaitTime
change_rts_config
write area=SCREENSAVER
WaitTime=<value>
WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Output/Input
enabled – the screensaver
state is actively switched
on, i.e. after the configured
wait time, the display is
automatically turned off,
and it is turned on again via
user input at the touch
screen or keyboard.
disabled – the screensaver
state is not activated. The
display is thus not switched
off automatically after the
wait time (or turned on
after a keystroke); instead it
remains in the state that the
user explicitly set.
<value>=enabled – the
screensaver state is not
activated, i.e. after the
configured wait time, the
display is automatically
turned off.
<value>=disabled – the
screensaver state is turned
off, i.e. the screensaver
does not influence the
display. However, the
display can be turned on or
off by the user.
Returns the time value in
seconds, after which the
display is turned off when
the screensaver is activated.
Changes the time value,
after which the display is
turned off when the
screensaver is activated.
<value> = integer, time in
seconds
Validity
immediate
Manual
Version 2.3.0