WAGO Kontakttechnik GmbH & Co. KG declines all liability resulting from improper action and damage to WAGO products and third party products due to non-observance of the information contained in this manual.
Routines or advice for efficient use of the device and software optimization. More information References on additional literature, manuals, data sheets and INTERNET pages 1.3 Number Notation Number Code Example Note Decimal normal notation Hexadecimal 0x64 C notation Binary '100' Within ', '0110.0100' Nibble separated with dots WAGO-I/O-SYSTEM 750 I/O Modules...
Do not use any contact spray. The spray may impair the functioning of the contact area. The WAGO-I/O-SYSTEM 750 and its components are an open system. It must only be assembled in housings, cabinets or in electrical operation rooms. Access must only be given via a key or tool to authorized qualified personnel.
An optocoupler is used for electrical isolation between the bus and the field side. Any configuration of the input modules is possible when designing the fieldbus node. Grouping of module types is not necessary. WAGO-I/O-SYSTEM 750 I/O Modules...
However, if such a case should occur, another supply module must be added. The digital input module 750-424 can be used with all couplers/controllers of the WAGO-I/O-SYSTEM 750. 2.1.1.3 Display Elements Channel...
750-424 [2 DI DC 24 V, Intruder Detection] Process image More Information Detailed references to the approvals are listed in the document "Overview Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM ELECTRONICC Tools and Docs (Item-No.: 0888-0412) or in the internet under: www.wago.com...
Page 11
750-424 [2 DI DC 24 V, Intruder Detection] • 11 Process image WAGO-I/O-SYSTEM 750 I/O Modules...