Serial Interface (X6); Figure 10: Rs-232 Serial Interface; Table 17: Rs-232 Interface: Pin Assignments - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
5.5 RS-232 Serial Interface (X6)
The following table provides information on the RS-232 interface pin
assignments:

Table 17: RS-232 Interface: Pin Assignments

Connector
1 2 3 4 5
6 7 8 9
Figure 10: RS-232 Serial
Interface
Open interface!
If this interface is not needed, it shall be closed by the protective cap provided
with delivery in order to prevent any possible damages caused by electrostatic
discharge.
You can use the following applications and services through this interface:
• I/O-Check
• MODBUS-RTU
• CoDeSys 2.3
• Linux console
•
•
Only one of these applications or services can be accessed at one time over the
RS-232 interface. This unique access can only be carried out in Web-Based
Management. See section "Page Administration" for more information.
Manual
Version 2.3.0
Pin
1
2
3
4
5
6
7
8
9
German keyboard layout
English keyboard layout
Description of I/O-IPC Interfaces
Description
DCD1
RXD1
TXD1
DTR1
GND
DSR1
RTS1
CTS1
RI1
35