WAGO -I/O-IPC-C6 Manual page 234

234 Appendix
Table 131: Description of the configuration scripts for " General SNMP information parameters "
Parameter
Configuration of SNMP v3
Any number of SNMP v3 users can be created. A user that has been set up is always active; the
complete data set must be deleted to deactivate a user.
Authentication
Name
Authentication
Encryption Type
Authentication
Key
Privacy
Encryption Type
Privacy Key
Trap Receiver
Address
Status Call
get_snmp_data
read
v3-auth-name <number>
get_snmp_data
read
v3-auth-type <number>
get_snmp_data
read
v3-auth-key <number>
get_snmp_data
read
v3-privacy <number>
get_snmp_data
read
v3-privacy-key <number>
get_snmp_data
read v3-notification-receiver
<number>
WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Output/Input
Specifies the user name of
the v3 user.
The <number> parameter
serves to enable
consecutive reading of the
related data from the
individually configured trap
receiver for a short period
of time (without interim
changing of the data). This
is a running number that is
not connected to the data. If
the number is not included,
the data of the first user are
read.
Specifies the type of
encryption that the v3 user
uses (none, MD5, or SHA).
Parameter <number> see
section "Authentication
Name".
Specifies the key string for
authentication.
Parameter <number> see
section "Authentication
Name".
Specifies the type of
privacy encryption for the
v3 user (none, DES, or
AES).
Parameter <number> see
section "Authentication
Name".
Assigns the key string for
privacy. If nothing is
entered here, the SNMP
agent will use the
"Authentication Key" for
this.
Parameter <number> see
section "Authentication
Name".
IP address of an SNMP
manager, to which the
agent traps for this v3 user
are sent. If nothing is
entered here, no traps are
sent for this user.
Parameter <number> see
section "Authentication
Name".
Validity
immediate
immediate
Manual
Version 2.3.0