Codesys" Page; Table 29: Description Of The Parameters Of The "Codesys" Page - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
9.1.3

"CoDeSys" Page

You will all information about the PLC program created in CoDeSys on that page.

Table 29: Description of the Parameters of the "CoDeSys" Page

Project Details
Date
Title
Version
Author
Description
CoDeSys State
State
Tasks
When running a PLC program, the following information appears for each task:
- Number of tasks
- Cycle count
- Cycle time (mcmsec)
- Cycle time min (mcmsec)
- Cycle time max (mcmsec)
- Cycle time avg (mcmsec)
- Status
- Mode
- Priority
- Interval (msec)
- Event
- Function pointer
- Function index
Manual
Version 2.3.0
Display of project information that the programmer entered in
the PLC program (in CoDeSys under Project > Project
Information...).
The information only appears in a executed PLC program.
Descriptive texts up to 1024 characters long are found under
"Description".
STOP: PLC program is not executed
RUN: PLC program is executed
Configuration 69