Ntp Client Configuration - WAGO 765-1503/100-000 Product Manual

Commissioning
Measurement
Voltage

10.3.3.1.8 NTP Client Configuration

The OPC UA server provides nodes for the configuration of the NTP client. The path to
this node is:
Root > Object > DeviceSet > [device name] > Configuration > Ntp-
Client
82 Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
Node Name Node Class
MaxTemperature- Variable
Pin2
MaxTemperature- Variable
Pin4
MinTemperaturePin1 Variable
MinTemperaturePin2 Variable
MinTemperaturePin4 Variable
MaxVoltagePin1 Variable
MaxVoltagePin2 Variable
MaxVoltagePin4 Variable
MinVoltagePin1 Variable
MinVoltagePin2 Variable
MinVoltagePin4 Variable
765-1503/100-000
Access Description
Read Maximum tempera-
ture on pin 2 since
the value was reset;
unit: °C
Read Maximum tempera-
ture on pin 4 since
the value was reset;
unit: °C
Read Minimum tempera-
ture on pin 1 since
the value was reset;
unit: °C
Read Minimum tempera-
ture on pin 2 since
the value was reset;
unit: °C
Read Minimum tempera-
ture on pin 4 since
the value was reset;
unit: °C
Read Maximum voltage on
pin 1 since the value
was reset; unit: mV
Read Maximum voltage on
pin 2 since the value
was reset; unit: mV
Read Maximum voltage on
pin 4 since the value
was reset; unit: mV
Read Minimum voltage on
pin 1 since the value
was reset; unit: mV
Read Minimum voltage on
pin 2 since the value
was reset; unit: mV
Read Minimum voltage on
pin 4 since the value
was reset; unit: mV