WAGO WINSTA® 770
770-629/130-000 WINSTA® Sunblind Box 4 Channel
7.4.6
Setting the Operating Function (Sunblind/Slat Function)
Set the operating function with switch 6 of the DIP module 2 to sunblind or slat
function.
7.4.6.1
Sunblind Function
To select sunblind operation, make the following settings:
Figure 29: Sunblind function
Factory setting
This is the factory setting for the operating logic.
7.4.6.2
Slat Function
In order to set the operating function to slat operation, make the following
settings:
Figure 30: Slat function
Manual
Version 1.2.0, valid from HW/FW version XXXX0201XX
Commissioning
41