Registering A Remote Storage System To A Xp7 Configuration Manager Rest Api Connection - HPE XP7 Automation Director User Manual

Registering a remote storage system to a XP7 Configuration Manager REST
API connection
Prerequisites
Verify the following:
• A Web service connection exists for both the XP7 Configuration Manager REST API server managing
the local storage systems and for the XP7 Configuration Manager REST API server managing the
remote storage systems.
See "Configuring Configuration Manager REST API connections on page 68" for more
information.
• You have an account with Administrator user group (built-in group) permissions on the storage system.
• The local storage system is registered to the XP7 Configuration Manager REST API Server at the
local site.
• The remote storage system is registered to the XP7 Configuration Manager REST API Server at the
remote site.
Procedure
1. On the Administration tab, select Storage Service Settings > Configuration Manager Settings.
2. From the Configuration Manager Connection section at the top of the window, select the XP7
Configuration Manager connection to which the local storage system is registered.
3. In the Local Storage System section, select the local storage system for which you want to add a
remote storage system.
4. At the top of the Remote Storage System section, click Register.
5. In the Register Remote Storage System dialog, select the remote site XP7 Configuration Manager
server to which the remote storage system is registered.
6. Select the remote storage system to register in the XP7 Configuration Manager REST API Server
that manages the local storage system.
7. If you did not enter an IP Address when creating the XP7 Configuration Manager REST API
connection, you must enter it now.
8. If you did not enter an HTTPS port number when creating the XP7 Configuration Manager REST API
connection, enter it now.
9. Select the Enable Configuration Manager Mutual Registration check box to automatically register
the local storage system information to the XP7 Configuration Manager REST API server managing
the remote storage systems.
10. Click OK.
NOTE: If you want to change the remote storage system information registered in the XP7
Configuration Manager REST API server, delete the remote storage system information and register
again.

Registering a remote storage system to a XP7 Configuration Manager REST API connection

75