Exporting A Service Template; Deleting A Service Template; Updating A Service Template Version - HPE XP7 Automation Director User Manual

4. Expand Advanced Options and select the options you want:
Scheduling Options:
Immediate: Run the service when it is submitted.
Scheduled: Run the service once.
Recurrence: Run the service multiple times.
5. In the Navigation pane, click each settings group and configure the required and optional parameters.
You can also navigate through the settings groups using the links at the bottom of the Settings pane.
6. After configuring the settings, do one of the following:
• Click Preview to open a view of the service as it would appear to a user. Then click Save and
Close to save the service.
• Click Cancel to close the window without saving any changes.
What to do next
Test the service if you created it in Test state.

Exporting a service template

You may need to export templates in the case where there are two separate Automation Director
environments. Templates from one environment can be exported and then imported to the other
environment.
Procedure
1. On the Service Templates tab, select a template and in the More Actions menu, click Export.
2. Click OK.
3. Choose a location and enter a name for the file.
The service template is exported to the location you specified.

Deleting a service template

Procedure
1. On the Service Templates tab, select a service template.
2. Click More Actions > Delete.
3. Confirm your choice.
The template is no longer in the Service Templates tab and you cannot create a service from the
template.

Updating a service template version

If a template has changed, you may need to update the version in the Service Templates tab.
Exporting a service template 51