HPE XP7 Automation Director User Manual page 119

Option
/password
/passwordfile
Storage destination
installation-folder\bin
Return codes
The following table lists the deleteremoteconnection command return codes and descriptions.
Return code
0
1
2
3
4
5
6
14
240
255
Usage example: - To delete the agentless connection-destination definition of the ID specified for
the parameter
deleteremoteconnection /id 12345 /user xxxxx /password yyyyy
Example: Output of normal deletion
KNAE03000-I The deleteremoteconnection command will now start.
KNAE03001-I The deleteremoteconnection command ended normally.
Example: Output of abnormal deletion
KNAE03000-I The deleteremoteconnection command will now start.
KNAE03002-E The deleteremoteconnection command ended abnormally (12345).
Description
Specifies is the password of the user that is specified in the /user option.
Either this option or /passwordfile must be specified. If both options are
specified, or if neither option is specified, an error is generated. The
password can be from 1 to 256 single-byte alphanumeric characters in length
including (! # $ % & ' ( ) * + - . = @ \ ^ _ |).
Specifies a password file (with absolute or relative path) that includes the
encrypted user credentials for the selected user. Either this option or the /
password option must be specified. If both options are specified, or if neither
option is specified, an error is generated.
Description
The command succeeded.
The argument is invalid.
The command stopped.
The service status is invalid.
An exclusion error has occurred.
Communication failed.
Authentication failed.
The user does not have permission to run the command.
Failed to delete an agentless connection-destination definition
The command stopped due to an error other than the ones listed in this table.
CLI commands 119