HPE XP7 Automation Director User Manual page 340

Property key
hyperv.cpuMaximumCou
ntPerNumaNode
hyperv.nodeMaximumCo
untPerNumaSocket
hyperv.memoryStartupM
egaBytes
hyperv.dynamicMemory
Enabled
hyperv.dynamicMemory
MinimumMegaBytes
hyperv.dynamicMemory
MaximumMegaBytes
340 Additional service templates
Property name
Maximum number of
processors that can be
used on a NUMA node
Maximum number of
NUMA nodes that can
be used by a socket
Startup RAM (MB)
Whether to enable
dynamic memory
Minimum RAM for
dynamic memory (MB)
Maximum RAM for
dynamic memory (MB)
Description
Specify the maximum
number of processors
that can be used on a
virtual NUMA (Non-
Uniform Memory
Architecture) node.
Specify an integer of 1
or greater.
Specify the maximum
number of virtual NUMA
(Non-Uniform Memory
Architecture) nodes that
can be used by one
socket. Specify an
integer of 1 or greater.
Specify (in MB) the
amount of memory to be
used during the startup
of the virtual server.
Specify an integer of 8
or greater that is a
multiple of 2.
To enable dynamic
memory on the virtual
server, specify "true". To
disable dynamic memory
on the virtual server,
specify "false". If
specification is omitted,
the current setting does
not change.
Specify (in MB) the
minimum amount of
dynamic memory.
Specify a multiple of 2 in
the range from 8 to the
"Startup RAM" value.
Specify this item only
when dynamic memory
is enabled.
Specify (in MB) the
maximum amount of
dynamic memory.
Specify a multiple of 2
that is not smaller than 8
and the "Startup RAM"
value. Specify this item
only when dynamic
memory is enabled.
Required or optional
O
O
O
O
O
O
Table Continued