Change Virtual Server Specifications (Cpu And Memory): Service Details - HPE XP7 Automation Director User Manual

Property key
OS.ipAddress2
OS.ipAddress3
OS.ipAddress4
OS.timeZoneWin
OS.systemLocale

Change virtual server specifications (CPU and memory): Service details

The processing overview is as follows:
1. The service asks whether CPU and memory settings are changing. If you do not want to change either
the CPU settings or the memory settings, the service ends abnormally.
2. The service makes sure that the virtual server is stopped:
• If the virtual server is running, the User-Response Wait plug-in is run to check whether to shut
down the virtual server.
• Users who have Modify permission can use this plug-in to specify an email destination, message,
timeout value, and information.
• If you select Shutdown from the UI of the User-Response Wait plug-in, the virtual server shuts
down.
• If you select Cancel or a timeout occurs while waiting for a response, the service ends abnormally
without changing the virtual server specifications.
3. The target settings for the CPU and memory resources of the virtual server are changed.
CPU settings that can be changed:
• Number of virtual processors
• Number of reserved virtual processor resources
• Maximum number of virtual processor resources
Property name
IP address (for second
NIC)
IP address (for third
NIC)
IP address (for fourth
NIC)
Time zone
System locale
Change virtual server specifications (CPU and memory): Service details
Description
Specify the 2nd IP
address for the virtual
server. You cannot
specify an IPv6 address.
Specifies the IP address
that is set for the third
NIC recognized by the
OS on the virtual server.
IPv6 addresses are not
supported.
Specifies the IP address
that is set for the fourth
NIC recognized by the
OS on the virtual server.
IPv6 addresses are not
supported.
Specify the time zone to
be set in the OS of the
virtual server.
Specifies the system
locale that is set for the
OS of the virtual server.
Required
O
O
O
O
R
335