Hyper-V 2012 Service Templates - HPE XP7 Automation Director User Manual

Property key
aws.checkInstanceDisab
ledCount
aws.checkInstanceDisab
ledInterval
Service Definition and Submit Service Properties
The following tables lists the properties shown in the Service Definition window and the Submit Service
window.
Property key
aws.foreachInstanceId

Hyper-V 2012 service templates

The following is a list of the additional Automation Director service templates for Hyper-V 2012, which are
imported by default. However, to use these service templates, you must create an associated service.
NOTE: If you used any of these additional service templates in Automation Director v8.2.0 (or earlier),
and have subsequently upgraded to v8.2.1 (or later), you cannot use the service version-up wizard to
upgrade to the latest version. Instead, you must recreate the services from the new versions of the
service templates.
Add a virtual server (deploy/OS initial settings)
Creates a virtual server in a Hyper-V 2012 environment.
Change virtual server specifications (CPU and memory)
Changes the values of virtual server specifications (CPU and memory) in a Hyper-V 2012
environment.
Delete virtual server
This service template deletes virtual servers in a Hyper-V 2012 environment.
Add virtual server (virtual disk)
This service template creates a virtual disk in a Hyper-V 2012 environment and then adds that virtual
disk to a virtual server.
Start virtual server
Starts multiple virtual servers in a Hyper-V 2012 environment.
Stop virtual server
Shuts down multiple virtual servers in a Hyper-V 2012 environment.
Property name
Instance status
(stopped) check count
Instance status
(stopped) check interval
Property name
Instance ID (multiple
selection allowed)
Description
Specify the number of
times to check for
instance stop. The
maximum waiting time is
determined by
combining this count and
the instance status
(stopped) check interval.
Specify the interval (in
seconds) to check for
instance stop.
Description
Specify an instance ID
or instance IDs. To
specify multiple IDs,
separate them by using
a comma. Up to 99 IDs
can be specified.
Hyper-V 2012 service templates
Required or optional
R
R
Required or optional
R
323